The PostnetVerifier^TM provides companies with an automated solution for enhancing existing print quality control programs. The PostnetVerifier^TM scans pieces during the production run and measures the Postnet bar height, bar width, bar spacing, skew, density, fill, and readability to verify if the printed information meets Postal standards.

• Reads Postnet barcodes and verifies print quality to help prevent costly printing errors and mail rejections by MERLIN®
  
• Line scan technology for accurate and optimal scanning
  
• Acts as a quality control step for ensuring accurate print quality
  
• Easy set up and operation
  

Note: The PostnetVerifier^TM should increase your chances of passing MERLIN®, however it is not a substitute for other quality control procedures and, for even better results should be used in conjunction with other procedures.

• Codes Supported
  Postnet (Zip and Zip+4)
• Maximum Read Rate
  Up to 10,000 per hour
  (depending on transport speed and barcode length. At higher speeds, the PostnetVerifier^TM reads every other piece.)
• Maximum Travel Speed
  75 in/sec (2 M/sec)
• Field of View
  85mm x 12mm
• Working Distance
  41mm, +/- 1mm
• Light Source
  Red 630mm LEDs
• Communications
  10/100 Base T Ethernet, RS232
• Equipment Interface
  Dry contact, NO/NC
• Physical Characteristics
  Dimensions: 2.3"W x 3.1"D x 7"H
  Power: 120 VAC, 60 Hz
• Computer Requirements*
  Pentium Processor, Windows, 500MHz, 128MB RAM, 5MB Disk Space, Ethernet, CD-ROM.
  *Computer required only for setup and adjustment of PostnetVerifier^TM.